Plumbers Tips - Burst Pipes

Burst Pipes
The water damage from a burst hot or cold water pipe can be substantial so it's important to locate and turn off the water supply as soon as possible to avoid any further damage or loss occuring.

Your House
Locate your water meter (usually at front of residence) turn the valve in a clockwise direction until off. If the valve is tight you may need the help of a wrench.

As well as turning off the water at the meter also turn on the front garden tap to stop any excess water from reaching the house. As well as the front garden tap turn on any other tap that is below the level of the burst pipe.

Home Unit
In a home unit the shut off valve can be found either under the kitchen sink near the "waste stack" or under the laundry tub or above or below the cistern valve in the main bathroom.

Once found, turn the valve in a clockwise direction to turn off the water supply. If the valve is tight you may need to get a better grip with a piece of cloth or use a wrench. Turn on all taps to drain any excess water from the pipes.

Water flowing from a burst pipe in a home unit is almost always more serious than a burst pipe in a house due to the close proximity of other units.

When you need a plumber in Sydney, call Wilco Plumbing on 0405 195 248.

<< Back to Plumbing Tips